Public Lab Research note


Testing for Microplastics in Bayou St. John

by GIA | March 02, 2021 17:24 02 Mar 17:24 | #25826 | #25826

Steps:

1. Grab some of the bayou water you will be testing with.

2. Pour the water into micro plastics filter.

3. Then, check the water filter in the stereoscope.

4. When looking in the stereoscope you must count all of the micro plastics seen in the filter.

5. Record the data found.

6. Finally, compare how many micro plastics did the water have throughout the weeks.


I did this Help out by offering feedback!


People who did this (0)

None yet. Be the first to post one!


2 Comments

Most of these pellets are usually circular, at least around here. Those pellets are hexagonal. It might make it easier to search for the company if the same holds true in the NOLA area. The process starts out with the pellets in a large container (tank truck, rail car, etc.). The pellets are then moved to the factory, usually by vacuum or air blowing. Which is why a loose hose can lead to a bunch pellets working into the water. The pellets are then molded by any number of different techniques. There are a large variety of colors in the sample. So the industry using the plastic would need many colors. Toys is my first guess, although there are others. If there is someone with access to an FTIR, the polymer could be identified. One of two of the pellets would need to be crushed as thinly as possible to make a film with heated pliers (hot press film) and the run on the IR. The base polymer should be identifiable. Try to use the lightest colored plastic possible for the IR testing. The other way would be solvent cast films. That is to be avoided, if possible.

Reply to this comment...


What kind of filter are you using? is it efficient? Would you recommend using it?

Is this a question? Click here to post it to the Questions page.

Reply to this comment...


Login to comment.