Public Lab Research note

Some simple additions for the new spectroscope camera

by Ligon | November 06, 2013 16:45 06 Nov 16:45 | #9736 | #9736

I had a bit of a problem with keeping the new camera in place, so I placed several pieces of thin (1/4 inch) styrofoam on each side of the wooden support block and shimmed it with cardboard to keep the block in place. I also added a tripod screw attachment by placing two appropriate nuts (1/4 inch), one on top of the other just in front of the hole where the cable comes out. I at first planned to use epoxy, but I found that Superglue seems to be adequate and sets much faster. The tripod attachment makes life much easier. I will add photos if anyone is interested.


I'd love to see some photos!

Reply to this comment...

Login to comment.