This is my last week doing research on the PLOTS spectrometer project, however another student will be picking up the project over the summer. This week I am without the UV modified camera, so I decided to work on designing a building a spectrometer with a reflective diffraction grating, instead of the transmission diffraction gratings I have been using so far. This would have the advantage of diffraction light without it first having to pass through the polycarbonate CD diffraction grating, which filters out the UV spectrum. While last week I was able to photograph a UV spectrum, it was with the use of specially purchased diffraction grating- it would be better to use a more common item. I went back to exploring the use of a DVD. I turns out that a DVD is actauly two layers of plastic, with the foil sandwiched in the middle. By cutting a notch in the DVD with a pair of scissors, it exposed the layers of plastic, and with a sharp edge, these can easily be pried apart. The result is that the reflective face of the foil layer is exposed, unlike on a CD, where the reflective face of the foil is adhered to the plastic. This means that with the dissected CD you have a diffraction grating where the light reflects directly off the foil, without first traversing a plastic layer.
Next I worked out the geometry needed to create a reflective diffraction grating spectrometer, and built one, spectrometer 4.0 as seen in the title picture
I photographed the spectrum of an incandescent bulb and a fluorescent bulb
The fluorescent bulb spectrum is overlaid with the actual spectrum, and I was happy with quality of the spectrum that I photographed right away, without having to mess around with adjusting light levels and angles and so forth.
Aside from not filtering UV light, the reflective grating spectrometer seemed to have a few other advantages: Because the light source was not in the line of sight of the camera, there was little or no glare in the spectrum. The DVD grating has twice as many grooves/distance than a CD, theoretically allowing it to have significantly increase spectrum resolution. Also, when taking the spectrum of a very bright light source, the photographer does not need to stare into the light source while trying to photograph it.
It will be interesting to see how the spectrometer does when photographing UV spectrum
Login to comment.