Public Lab Research note

Kite Construction: How bad can it get?

by mathew | June 04, 2016 00:29 | 124 views | 0 comments | #13165 | 124 views | 0 comments | #13165 04 Jun 00:29

Read more:

What I want to do

I'm interested in workshopping Stormy Weathers' Horned Allison Sled Kite. (plans pdf), and I wanted to see how poor the construction could be and still have a flying kite.

My attempt and results

I started from a pre-cut pattern in Tyvek (this part was precise, I think I'd pre-cut the patterns in a workshop), and then taped down the McDonalds' straw spars recommended in the plan with 1" masking tape. I stuffed three straws into each other, end to end, and I lined them up by eye and taped them down. It was very messy and I didn't fold in any reference marks or anything:


I similarly applied the 1/4" PP strapping tape (brand: Tesa 4288) for the bridle attachments entirely by eye. They are slightly uneven.

Then I tied the bridle. Here I made sure the bridle point was in the exact middle.

In Flight

I flew this kite and it flew great. I haven't gotten a good in-flight photo yet. I was suitably impressed, and it flew better than the version I made very carefully with bamboo spars.

Questions and next steps

My goal is to use this kite as a wind speed meter and need to calibrate it. I need to get a better clinometer and spring scale setup. My current spring scale is 5000g, @Ecta64 is recommending 250g scale. I should really attach the clinometer to a tripod or other leveling system.


I also need to replace the stretchy dacron line with a non-stretch line, as recommended for a kite anemometer (wind speed meter). I bought 3000' of 70lb kevlar line from Emmakites.

I want to see if I get the same high-wind spar failures that @Ecta64 is reporting.

I should try a version out of a plastic bag, not just my fancy type 10 Tyvek.

I did this Help out by offering feedback! Browse other activities for "kite-making"

People who did this (0)

None yet. Be the first to post one!


Login to comment.

Public Lab is open for anyone and will always be free. By signing up you'll join a diverse group of community researchers and tap into a lot of grassroots expertise.

Sign up