Public Lab Research note


Calibrating a Microscope

by mathew | August 23, 2016 17:19 | 282 views | 2 comments | #13391 | 282 views | 2 comments | #13391 23 Aug 17:19

image credit wikimedia

What I want to do

I have an openflexure microscope and I want to calibrate it. I've acquired two tools to do so, a stage micrometer, and 2.07μm Polystyrene Latex (PSL) Spheres by Ladd Research. I have previously documented the method for calibration with the stage micrometer that i learned from @AmberWise and Andrew Maselli at Chicago State, and recently replicated it with my OpenFlexure microscope.

But in order to check the particle sizing methods @SimonPyle has automated for use in dust sensing, I would like to compare particles of a known size to the measurements the analysis produces.

Experimental Goals

My goal is to understand whether a stage micrometer calibration is sufficient to accurately size small particles, since the stage micrometer is reusable and fairly affordable (less than $100). After analysis, I should be able to compare the average particle size of the particles (2.07μm) to the measured particles size.

This will lay the groundwork for running (passive particle monitor samples)[https://publiclab.org/tag/passive-pm] here in support of our development goals.

Proposed Process

I'm going to prepare a slide with the PSL spheres, take a calibration image of the stage micrometer, and then take 40 images of the prepared slide with the microscope. then run it through @simonpyle's ImageJ macro, followed by the analysis spreadsheet @AmberWise and I put together.

Next Steps

time to do this!


I did this Help out by offering feedback! Browse other activities for "microscope"


People who did this (0)

None yet. Be the first to post one!


2 Comments

Here are some image sets including a flat field calibration and scale from the PSL imaging.

flat_field.jpg

20160923_PSL_Sphere_SET.zip

scale.jpg

Reply to this comment...


Saw this during the air pollution open call today, It looks really nice! any reason you used ImageJ and not Python + OpenCV?

Is this a question? Click here to post it to the Questions page.

Reply to this comment...


Login to comment.

Public Lab is open for anyone and will always be free. By signing up you'll join a diverse group of community researchers and tap into a lot of grassroots expertise.

Sign up