Let’s talk about air quality data! Join us for Open Call on Oct. 26 to kick-off this topic and then every Tuesday until Dec. 14. Click here for call-in details!

Public Lab Research note


Plastic Tubing Oblique KAP Rig

by ranon | June 22, 2016 20:28 22 Jun 20:28 | #13228 | #13228

LDPE Tubing Rig

Materials_Construction_Sketch.jpg

The design for this KAP rig came out of experimenting with low density polyethylene (LDPE) tubing to create a low cost DIY rig.

Prototype

Tinker_Toy_Rig.jpg

The current prototype uses four circular 3D printed spools which allow the camera platform to rotate up and down.

Continuing Development

Refinement_Sketch.jpg

A second spool is currently in development which will have notches to allow for incremental adjustments to the camera angle. Also in development is a method for attaching a shaft to the top tube or rod which can be used to connect a pendulum or picavet.

Update 6/24

Tinker_Toy_Rig_-_Slot_Gear___Picavet.jpg The top tube now has a joint to connect a picavet or pendulum,

Gear_Spools.jpg

also two gear shaped spools allow for incremental camera angle adjustment. The longer slot shaped spool allows the camera to be mounted further back to improve balance.

6_and_7_Point_Spools.jpg

The current challenge is determining a structure that will protect against significant impact drops. I am experimenting with 5, 6, and 7 pointed outer spools to attach different lengths of tubing.


I did this Help out by offering feedback!


People who did this (0)

None yet. Be the first to post one!


0 Comments

Login to comment.