Public Lab Research note


Build a "Mega Coqui" water conductivity sensor with an amplifier

by warren with mimiss | March 26, 2019 18:51 | 238 views | 2 comments | #18868 | 238 views | 2 comments | #18868 26 Mar 18:51

Read more: i.publiclab.org/n/18868


Building on these two activities: #coqui-audio-jack, and looking to do a Coqui water sampling and comparison workshop, we added an audio jack to the Coqui so we could amplify the output. This was nice both at the student workshop in Cranston, and also at the Texas Barnraising, where people built their own Coquis.

image description

To do this, start with the basic Coqui building activity here. Then follow the next few steps to add an audio jack and plug it into a speaker!

I built it all into a small box, and found these audio jacks which can be screwed into a hole - they worked in just the kind of hole a paper hole puncher makes (order a Coqui with an audio jack here):

image description

I put wires into the R and T holes (standing for Ring and Tip, i believe) and ran them to the same holes as the piezo buzzer go to in the Coqui circuit board.

Basically the plug can play the same role as the piezo and can be plugged in at the same time, or instead of the piezo buzzer:

image description

I started with a light sensor instead of probes, for testing (so I could just hear the sound changing pitch without needing a water sample), but also added two longer probe wires through a second hole, which I covered with strong tape from the inside:

image description

Finally, I used some strong tape to attach everything inside, making it easier to carry around. It's quite loud!

We're carrying these now in the Public Lab store -- click here to order one!

https://store.publiclab.org/products/coqui

See the lead image where we've plugged it into a little speaker!

I'd love to see where people take this and what you do with it!


I did this Help out by offering feedback! Browse other activities for "coqui"


People who did this (0)

None yet. Be the first to post one!


2 Comments

@warren has marked @mimiss as a co-author.

Reply to this comment...


Once you build a mega-coqui you can then record the audio signal and later analyze it using the free and open source software Audacity

Record → https://publiclab.org/notes/imvec/06-09-2018/coqui-wave-audio-recording

Analyze → https://publiclab.org/notes/imvec/06-11-2018/analizing-the-signal-of-the-coqui-using-audacity

Reply to this comment...


Login to comment.

Public Lab is open for anyone and will always be free. By signing up you'll join a diverse group of community researchers and tap into a lot of grassroots expertise.

Sign up