| Author | Comment | Last activity | Moderation | ||
|---|---|---|---|---|---|
| stef | "select the spectrum to be calibrated in SW click on copy calibration, put in the number of the spectrum to copy. that should do it. Stef " | Read more » | about 2 years ago | |||
| stef | "The window is the correct size it is used to select a pixel row from the camera. I have the Thunder Optics SMA-E model and works well with SW also ..." | Read more » | about 2 years ago | |||
| stef | "Addendum: the manufacturer has several software for the mini spectrometer, have you had any results using that? Also what was your light source for..." | Read more » | over 2 years ago | |||
| stef | "It would be useful if the model of the spectrometer was included as well as a file of the win10 and the raw output of the spectrometer. it may be t..." | Read more » | over 2 years ago | |||
| stef | "save some time and get the v3.0 kit from the store and research the notes from @Stoft and @Warren, one thing to keep in mind when using card stock ..." | Read more » | over 3 years ago | |||
| stef | "Can you further identify the camera? Is it used in any of the projects? Were can I purchase one? Im curious is there a data sheet available for iit..." | Read more » | over 3 years ago | |||
| stef | "In your second image look at the ccd sensor identified as V2 ithas a reddish tint to it look for something like that on the back end of the lens as..." | Read more » | over 3 years ago | |||
| stef | "The ir cut filter should be on the back of the lens barrel assembly you can check for it by looking at an angle and look for a greenish irradiance,..." | Read more » | over 3 years ago | |||
| stef | "if you read my research note,it was quite specific about the model of the spectrometer used in the plab spec 3 model as supplied I have no idea whe..." | Read more » | over 3 years ago | |||
| stef | "Hi, the camera used in the plab spectrometer does indeed have an ir filter' I published a note quite some time ago on how I did it. please do a sea..." | Read more » | over 3 years ago | |||
| stef | "You might do a search for notes by @stoft 're the plab v3 model. There are drawings that he produced and excellent discussions. The plab v3 mounts ..." | Read more » | over 4 years ago | |||
| stef | "Further to my previous replies, it may be possible to view the sun disk attenuated with the filters used by welders to view their work. I have not ..." | Read more » | about 5 years ago | |||
| stef | "What I was alluding to is that with all of the filter attenuation, the cmos sensor was still overloaded. This can be seen in the spectra submitted..." | Read more » | about 5 years ago | |||
| stef | "I have used photographic neutral density filters and have not been able to view the sun directly using the spec3 highly modified device. The attenu..." | Read more » | about 5 years ago | |||
| stef | "Very nice, but more detail is needed. stef " | Read more » | over 6 years ago | |||
| stef | "Unfortunately I did not do a baseline measurement to do a comparison. Will keep that in mind for the future. stef " | Read more » | over 6 years ago |