Let’s talk about air quality data! Join us for Open Call on this topic every Tuesday until Dec. 14. Click here for details!

Public Lab Wiki documentation


3 | 7 | | #25807

Lead image: Sprouting lettuce seeds, Rasbak, CC BY SA

What’s a bioassay and how does it work?

A bioassay is a method that uses plants, animals, or other living things to measure the harmful effects of environmental pollution.

This method works by exposing living things to different environmental samples, like soil or water, that vary in how polluted they are. Polluting chemicals in soil or water can affect how that living thing grows or functions. For example, contaminated soil can stunt a plant’s growth (see the image below) or prevent plant seeds from sprouting. So, measuring and comparing growth in living things exposed to different environmental samples can indicate the relative toxicity of the sample.

You can find a good introduction to bioassays with a short list of environmental monitoring studies that have used bioassays at the Environmental Inquiry page from Cornell University.

DIY bioassay methods

Lettuce seed bioassay for soil or water

This method uses common lettuce seeds to test for toxicity in soil or water samples. Contaminants in the soil or water can prevent seeds from germinating (sprouting) or slow down root growth.

lettuce seed bioassay

Image: A lettuce seed bioassay showing longer roots in seeds that sprouted in distilled water (DW) compared to shorter roots in seeds exposed to different concentrations of ethyl acetate, a chemical that negatively affects growth. From Waqas et al. 2013, CC BY

How to use this method:

  1. On the Environmental Inquiry page, you’ll find bioassay procedures and worksheets originally developed for high school classrooms.
  2. The US EPA Protocols For Short Term Toxicity Screening Of Hazardous Waste Sites document is a more detailed guide providing background information, guidance on sampling and data analysis, and hypothetical case studies, plus procedures.
    • Recommended step-by-step protocols for lettuce seed germination (section A.8.6, pg. 84) and lettuce root elongation (section A.8.7, pg. 90). These protocols are more involved and require more equipment than the “Environmental Inquiry” procedure linked above, so maybe less DIY.

Basic info about this method:

  • How easy is it to use? Beginner
  • How easy is it to make? Beginner
  • Cost upfront?
    • ~$6 USD for a pack of 1000 seeds (make sure the seeds aren’t advertised as “treated”)
    • ~$1 USD for a gallon (3.8 L) of distilled water
    • ~$10 USD for qualitative filter paper. Note from Environmental Inquiry guide: “Absorbent paper towels or coffee filters can be substituted for the filter paper, as long as they are first shown to be nontoxic. (Bleached paper may contain dyes or chlorine.)”
    • More materials and specialized equipment are needed for the EPA recommended protocols.
  • Time investment: 5 days for seed germination

A particular variety of lettuce called “Buttercrunch” (Latin species name Lactuca sativa) is the standard variety typically used in bioassays and recommended by the US EPA.

Duckweed bioassay for water

Duckweeds are tiny floating plants that live in freshwater ponds, lakes, and wetlands. They grow quickly by adding leaf-like fronds. The bioassay compares growth rates by counting the number of new fronds over time.


Image: Flowering duckweed, rjp, CC BY SA

How to use this method:

The Environmental Inquiry page is again a great resource. On the duckweed bioassay page, you’ll find links for guidance on culturing/keeping duckweed, instructions for performing the bioassay, and guidance for analyzing your results.

Not-quite-DIY and commercial bioassay methods

Bioluminescence inhibition assay

The “bioluminescence inhibition assay” is a widely-used and standardized method that uses bioluminescent (glowing) marine bacteria to indicate toxicity of environmental samples, including soil, sediment, and water.

Pollutants in the sample interfere with the bacteria’s functioning, and that reduces (inhibits) the amount of visible light they produce. The change in their light output is measured and correlated with toxicity levels. In general, the more polluted the sample, the dimmer the bacteria get.

The bacteria most commonly used is Aliivibrio fischeri (a.k.a Vibrio fischeri), which is widely found in oceans around the world.

Hawaiian bobtail squid with glowing bacteria

Image: A Hawaiian bobtail squid whose glowing skin comes from bioluminescent marine bacteria. The bioluminescence inhibition assay uses the bacteria, not the squid. Margaret McFall-Ngai, CC BY

How to use this method:

A portable commercial unit with all the equipment needed from the Microtox company costs about $10k USD. Here’s a rapid test kit from another company for $160 USD.

Uses for bioassays

  • Determining the immediate toxicity of a potentially polluted soil or water sample.
  • Evaluating whether remediation of a contaminated site is working (comparing bioassay results before, during, and after remediation).


  • Bioassays won’t tell you what specific pollutants are present in an environmental sample.
  • A single test organism / bioassay may not respond to all of the polluting chemicals you might be concerned about (Bitton and Koopman 1992, link to book chapter).
  • The specific organism responses measured in the bioassay might not always be sensitive enough to indicate contamination. In the lettuce seed bioassay, for example, seed germination after 5 days is a common “endpoint” measurement that’s used to compare different samples. But some researchers have found that this measurement alone doesn’t always indicate toxic effects, and that comparing germination rates daily might be a more sensitive test (Da Silva Júnior et al. 2013, link to paper).


Ask a question  or help answer future questions on this topic

Research notes


Title Updated Version Views Likes
Soil remediation 15 days ago by laurel_mire 10 161 1
Bioassay about 2 months ago by alejobonifacio 7 198 2
Bioindicators 3 months ago by alejobonifacio 5 86 0
Biohacking / DIY Bio about 8 years ago by TedF 2 594 1


Purpose Category Status Author Time Difficulty Replications
Nothing yet on the topic "bioassay" -- be the first to post something!

Add an activity  or request an activity guide you don't see listed

Activities should include a materials list, costs and a step-by-step guide to construction with photos. Learn what makes a good activity here.

Further reading and resources

Guides and protocols

Published articles

  • Valerio M.E., García J.F., and Peinado F.M. 2007. Determination of phytotoxicity of soluble elements in soils, based on a bioassay with lettuce (Lactuca sativa L.). Science of The Total Environment, 378(1–2): 63-66. LINK to abstract.
  • Da Silva Júnior F.M.R., Garcia E.M., Baisch R.M., Mirlean N., and Muccillo-Baisch A.L. 2013. Assessment of a soil with moderate level of contamination using lettuce seed assay and terrestrial isopods assimilation assay. Soil & Water Research, 8: 56–62. LINK to full-text.
  • Bierkens J, Klein G., Corbisier P., Van Den Heuvel R., Verschaeve L., Weltens R., and Schoeters, G. 1998. Comparative sensitivity of 20 bioassays for soil quality. Chemosphere, 37(14–15): 2935-2947. LINK to full-text.