Public Lab Wiki documentation

Infragram Filters

1,259 views | Last edited by warren almost 2 years ago | #15087

« Back to Infragram

The Infragram project has used a variety of filters to make Do-It-Yourself infrared cameras, as well as infrared-visible multispectral cameras. This page is about choosing filters for different purposes.

Red vs Blue

Both blue and red filters are intended to block most visible light in one channel, to then use that channel for near-infrared light. This way, a single camera can be used to take simultaneous visible light and near-infrared light photos -- one in the red channel, one in the blue channel (we discard the green channel).

Most recent DIY efforts on Public Lab have focused on red filters, but early on we used blue filters. A red filter (the most common conversion we see on Public Lab as of October 2017) results in vegetation appearing pale blue, and a blue filter typically results in vegetation appearing pale yellow.

Left: pale blue from a RED filter; Right: pale yellow from a BLUE filter. Images by @mathew and Eclectis students

Background on filter choice

There's a lot of research about this choice here:

Filter sources

We've been using Rosco theater gels as filters, and we currently carry the red Rosco Fire # 19 in the Public Lab store

Red filters include:

  • Rosco Fire # 19

Blue filters include:

  • Rosco # 2007
  • Rosco # 87

Also see this research on various Rosco filters:

Title Author Updated Likes
Artichoke filter search @cfastie about 1 year ago
Hacked Infragram Raspberry Pi camera now on the International Space Station @warren over 1 year ago
NIR, Rosco fire #19 and my elph 300HS from Christmas @admaltais about 4 years ago
Video streaming with infragram on intel edison (ubilinux) @pjsbill over 4 years ago
Canon SD4000IS as Infragram @warren about 5 years ago
Announcing the Infragram Point & Shoot @mathew over 5 years ago
A Wratten 25A replacement from Rosco? @mathew over 5 years ago
NDVI with Canon A2300, APM Hexacopter DJI550, Help @andresc4 over 5 years ago
A490 Rosco 2007 initial results @patcoyle about 6 years ago
NDVI from Infrablue @cfastie about 6 years ago
Infrafilters @cfastie over 6 years ago
Middlebury Meetup @cfastie over 6 years ago
Rosco! @cfastie over 6 years ago
Superblue @cfastie over 6 years ago
Show more

And the Rosco website:

And an article on the history of Rosco filters:

Exposed negative film

To make a camera take only near-infrared photos, you can use a piece of exposed negative film as a filter. This will block most visible light (since the red, green, and blue channels are blocked) but will allow infrared light.

Public Lab is open for anyone and will always be free. By signing up you'll join a diverse group of community researchers and tap into a lot of grassroots expertise.

Sign up