Public Lab Wiki documentation



Papercraft Spectrometry Starter Kit

This is a revision from October 27, 2016 20:38. View all revisions
5 | 42 | | #5215

New to spectrometry? On a budget? Looking for something to introduce a group to spectrometry? You might like to try the Papercraft Spectrometry Starter Kit, a simple foldable paper spectrometer which you can attach to a smartphone or webcam. It’s made of paper to reduce cost and complexity, and is mainly intended as a low cost “introductory” or educational kit.

Purpose

The resolution and stability (ability to hold a wavelength calibration) of the spectrometer depend on how carefully you construct and store it. This kit is designed to be easy to assemble, and is not focused on precision or consistent measurements; it’s made of paper, and will crush if you put it in your pocket -- but it can be made out of easy-to-find materials and assembled in ~15 minutes. To improve it, see the related hardware mods and feel free to post your own adjustments as a research note. For a more rigid, robust device intended for more advanced work, check out the Desktop Spectrometry Starter Kit.

Most digital cameras can record light in the visible range, ~400-700 nanometers, so this determines the range of your device. The resolution is mainly limited by the resolution of the camera (and its focus!) and by the narrowness of the slit -- but measurements should be possible at better than 3 nanometers per pixel. See limitations and goals for more.

Activities

Purpose Category Status Author Time Difficulty Replications
Build a papercraft spectrometer for your phone -- version 2.0 - - @warren - - 2 replications: Try it »
Calibrate your spectrometer in Spectral Workbench verify review-me @warren 15m easy 5 replications: Try it »
Assemble a DIY Papercraft Spectrometer build complete @abdul 10min introductory 3 replications: Try it »
Reduce light inside foldable PL spectrometer - - @xose - - 0 replications: Try it »
Scan and compare different gases (in discharge tubes, like neon) using a DIY spectrometer - - @warren - - 27 replications: Try it »
Make a narrow slit for a DIY spectrometer out of paper - - @warren - - 0 replications: Try it »
See the Fraunhofer absorption lines in sunlight verify draft @warren 1h easy 4 replications: Try it »
Draft: Find the concentration of a liquid with a DIY spectrometer - - @warren - - 0 replications: Try it »

Activities should include a materials list, costs and a step-by-step guide to construction with photos. Learn what makes a good activity here.

Upgrades

Have you added to your starter kit, improved it, or redesigned it? Show others how to take it to the next level by posting a build guide here:


Add your upgrade guide here Request or propose an upgrade

Upgrades should include a parts list and a step-by-step construction guide with photo documentation. See an example.


Get involved in the next revision

As these upgrades mature, the Kits initiative will incorporate some into the Foldable Spectrometer Starter Kit itself (depending on cost & complexity) as part of our commitment to an open hardware design process


Frequently Asked Questions

This section is for questions about the Foldable Spectrometer Starter Kit, specifically. For questions about spectrometry in general, see this FAQ.

Ask a question about the foldable spectrometer

Title Author Updated Likes Comments
I'm completely confused. I built the papercraft one, but then what do I do? @mactac11 over 2 years ago 1
Split DVD – which part to use for spectrometer @Nelari over 3 years ago 4
Can you give me measure for spectrum? Thank you. @Skorex over 3 years ago 2
Can I get a file of numbers instead of a graph from the foldable spectrometer software? @mountevans over 4 years ago 4
Do I need to use a DVD-R? Will a CD-R work too? @jordankc over 4 years ago 2
Paper for printing @G33K4P00RV4 almost 5 years ago 5
Noise when Trying to Analyze Spectrum @matthart610 almost 5 years ago 1
Can I use a Diffraction Grating Slide Holographic 1000 lines/mm instead of the CD? @oglezsa almost 5 years ago 3
What's an easy way to compare two liquid samples with a spectrometer? @warren almost 5 years ago 7


Plans, materials, and what it takes to make one:

mini fold up spectrometer as vector

Instructions

  • print and/or trace this letter-sized PDF pattern onto black paper
  • cut out with scissors, no other special equipment required
  • fold the paper along the lines to form a rectangular tube (takes about 15 minutes)

See assembly photos here

This starter kit includes these materials:

  • a piece of pre-printed paper (dimensions) with a hole for the camera
  • a DVD-R
  • a narrow slit printed onto plastic film (see image - and how to make one of these)

The kit uses, but does not include, a smartphone with a camera (or a webcam) to capture images of spectra through the spectrometer you construct. It works with free web software https://spectralworkbench.org.

See how to get started using this kit in the Activities section of the Spectrometry page.


Limitations and Goals

This starter kit is a great way to begin learning about spectroscopy by building a simple one, but is not meant for quantitative research. Once you’ve mastered it, you can improve it with some of the hardware mods listed here, or to take it to the next level, see the Desktop Spectrometry Starter Kit for a more robust platform to build on.

Though it is specifically designed to be an “introductory” kit, there are a number of goals to work towards, and limitations which you can help to overcome in the current design. Intro-level kits play an important role in helping people build the skills they need to join in the project and improve these methods -- in building a large collaborative community around this project.

Some of the goals and challenges we’re still working on with this kit include:

  • the alignment between the foldable spectrometer and a smartphone or webcam is hard to keep consistent with soft materials like paper
  • assembly relies on careful gluing or taping -- could we make a glue-less tab-based version that’s still light tight?
  • the film-printed slit in the starter kit is really nice, but can be hard for someone to make on their own -- some tips on making your own slits would be helpful
  • a wider spectrometer would make a wider spectrum, which would be easier to capture a picture of
  • comparing spectra with different light sources, or between different devices, is not well explored; learn more this challenge here

Get involved in the next revision

(coming soon)

Assembly Photos

Cut out along the outer edge if not already cut out. mini fold-up spectrometer assembly

Fold as indicated by the lines. Thinly dotted lines are folded down, dashed lines folded up. mini fold-up spectrometer assembly

Glue or tape together. Start with the top flap and make sure the edges are aligned. mini fold-up spectrometer assembly

Except for the Diffraction grating on door, glue or tape all flaps down to the outside. mini fold-up spectrometer assembly

To make a diffraction grating from a DVD-R, peel back the reflective layer, and cut a small square out of the transparent layer. See also: Preparing a DVD-R to act as a diffraction grating for more information on the optional removal of the residual aluminium and dye layers.

peeling DVD

mini fold-up spectrometer assembly

Tape or glue down the DVD-R diffraction grating to the inside of the spectrometer so that the diffraction grating is vertical, producing a horizontal spectral rainbow. Then glue the door closed. mini fold-up spectrometer assembly

Attach The spectrometer to a webcam with the aid of a box, to a phone, or to a computer. mini fold-up spectrometer assembly

Illustrated Assembly Guide

Cut out along the outer edge if not already cut out.

mini-spectrometer assembly

Fold as indicated by the lines. Thinly dotted lines are folded down, dashed lines folded up. mini-spectrometer assembly

Except for the Diffraction grating on door, glue or tape all flaps down to the outside. mini-spectrometer assembly

To make a diffraction grating from a DVD-R, cu a square from the outer edge. The DVD has is two layers of plastic. Peel back the reflective layer, and cut a small square out of the transparent layer. mini-spectrometer assembly

Tape or glue down the DVD-R diffraction grating to the inside of the spectrometer so that the diffraction grating is vertical, producing a horizontal spectral rainbow. Then glue the door closed. mini-spectrometer assembly

Attach The spectrometer to a webcam with the aid of a box, to a phone, or to a computer. mini-spectrometer assembly