Have you attended an online call with Public Lab? We'd love your feedback!

Public Lab Wiki documentation

Smartphone spectrometer

This page refers to a product no longer sold by the kits department. Plans still exist but item is discontinued in favor of the desktop spectrometer and the foldup spectrometer. This info is here for archive purposes only.

The final instructions (as sent to press) are here:

smartphone-spec-instructions-p1-1.0.pdf

smartphone-spec-instructions-p2.pdf

List of parts

3 injection molded plastic (ABS) parts
2 short screws
2 long screws
black paper liner
diffraction grating
protective film
precision printed slit
jewelers screwdriver

Design files

This being open hardware (CERN OHL 1.1), here are the files:

PublicLaboratory_Mobile_Spectrometer_v31.zip

These are also on Thingiverse: http://www.thingiverse.com/thing:116610

And here is a more 3D-printable version by Brad Dudenhoffer:

http://www.thingiverse.com/thing:125428

Order a 3D print on Shapeways here: https://www.shapeways.com/model/976427/public-lab-smartphone-spectrometer.html

Instructions

Sketchup model: smartphone-spec-overview.skp

Mathew's Assembly Run

3 injection molded plastic (ABS) parts
2 short screws
2 long screws
1 short black paper liner (5cm x 4cm)
1 long black paper liner (5cm x 8cm)
6 5cm lengths of double-sided tape
1 5cm black foam tape
diffraction grating (5cm x 4.4cm) *~~protective film~~ I did without-- this extra step increases the chances of damaging the grating in order to protect it.
precision printed slit
jewelers screwdriver
razor blade

See full image set here

Adhesive options

Here's a list of other adhesives and tape strips which may be helpful in assembling and mounting the spectrometer. Some may be shipped in the kits:

Tape strips are sold for costumes and wigs: http://www.amazon.com/Bonding-Double-Tape-Walker-Straight/dp/B00D7LA162/
3M's super strong 300LSE in letter sheets, ~$12 each: http://www.amazon.com/9474LE-super-strong-double-sided-adhesive-transfer/dp/B00CCGK31G/ ** these are an excellent option. 3M sells 24x36" sheets somewhere. we can save users any trimming through cutting to 6mm wide-- the width of the edges of the mountplate. one sheet = 300 30cm strips 6mm wide, giving each user 6 5cm pieces they can cut to length with their razor. Then there's no tape trimming to do when attaching.
Scrapbooking tape strips: http://www.amazon.com/Double-sided-adhesive-mounts-12-pack/dp/B00D5WDZXO/ (hard to find but good size -- big lots available on ebay: http://www.ebay.com/itm/New-72-Packs-Scrapbook-Double-Sided-Adhesive-Strips-/321157403796 is 3600 strips for $65, or 2c per strip)

Photos

Photos of the assembly process.

Public Lab is open for anyone and will always be free. By signing up you'll join a diverse group of community researchers and tap into a lot of grassroots expertise.